Natural Bestfilament ABS plastic for 3D printer 1 kg (1.75 mm)

Natural Bestfilament ABS plastic for 3D printer 1 kg (1.75 mm) Bestfilament natural ABS 1.75 mm for 3d printers.The most popular consumables for 3D printing, ABS plastic available in different colours. Choose discounted here!


  • Type: ABS
  • Dia: 1.75 mm
  • Weight netto: 1 kilo
  • Weight brutto: 1.35 kg
  • Dimensions: 20 х 20 х 8 см (0,0032 м3)
SKU: st_abs_1kg_1.75_natural
Main Warehouse: In stock
  • Description
  • Reviews

ABS (abs) — high impact technical thermoplastic resin obtained from petroleum.

One of the most popular plastics for 3D printing. ABS plastic is more flexible than PLA, and is well treatable. The printed product can be sanded, covered with primer, and further with acrylic paint. Treatment with acetone allows to smooth the characteristic of 3D printing irregularities ("step").

Due to the high strength ABS plastic suitable for printing of structural elements of buildings, elements of mechanisms.

The advantages of ABS Bestfilament:

  • A wide color palette.
  • Easily polished and painted.
  • Possible post-processing using acetone to smooth the "steps" layers.
  • Parts can fasten together with superglue.
  • The deviation of the diameter of the rod within the coil is not more than 0.02 mm.

Recommended print settings for ABS Bestfilament:
The temperature of the extruder: 230-260°C
Temperature table: 90-110°C
Print speed: 40-60 mm/s
Airflow models: No (May be required for small parts)
Retracts: Yes
Printer enclosure: Closed
Shrinkage printing: 0.4%
Solvents: Dichloroethane, dichloromethane, acetone, ethyl acetate

Advice from Bestfilament:

  • To improve adhesion coated plastic platform recommend you to use a hairspray or a solution of ABS in acetone.
  • Use only in well-ventilated areas.
  • To avoid twisting of the model when printing, and cracking mandatory heated platform and a closed housing of the printer.

Natural Bestfilament ABS plastic for 3D printer 1 kg (1.75 mm) reviews

  • Перехлёсты.
    By December 18, 2017 10:06

    Досадно, что при высоком качестве самого пластика, намотка катушки просто отвратительная. Сплошные спутанные витки, а в середине и вовсе обнаружился перехлёст.
    Печатать им к сожалению невозможно, так как пруток клинит намертво через каждые чес-два печати.
    Выброшенные на ветер деньги, ни одной законченной детали с этой катушки у меня так и не вышло.
    Фото перехлёста :

  • Стекло
    By October 23, 2017 11:19

    С использованием растворенного в ацетоне пластика в виде жидкости для адгезии стола нужно быть поосторожнее. Печатается идеально, но при естественном остывании (усадке) пластик скалывает верхний слой стекла. Проверенно на личном опыте.

Read all 2 reviews on Natural Bestfilament ABS plastic for 3D printer 1 kg (1.75 mm)