Yellow PETG filament Bestfilament for 3D Printers 1 kg (1,75 mm)

Bestfilament 1,75mm PETG 3D printer filament 1kg (2,2Lbs) Dimensional Accuracy +/- 0.02 mm

PETG Bestfilament is one of the most durable 3D printing consumables available in a variety of colors!

Benefits of PETG Bestfilament

• Very strong filament;
• Adhesion of layers is unprecedented;
• Details from this material are durable;
• Does not emit odor when printed
• First-class raw materials for production provide quality comparable to expensive European counterparts;
• Suitable for most FDM printers.

Specifications

Specific gravity: >1.29 g/cm3

Humidity: <0.3%

Glass transition temperature: 80°C

The deviation of the diameter of the rod within one coil is not more than 0.02 mm!

PETG Bestfilament is a wear resistant copolyester (combination). PET stands for polyethylene terephthalate and the G indicates that it has been modified with glycol for greater durability. Durable material, exceptionally strong and odorless when printed.

The use of an automated quality control line guarantees a deviation of the bar diameter within one coil of no more than 0.02 mm.

Recommended print settings for PETG Bestfilament

Extruder temperature: 220-245°C;

Table temperature: 60°C;

Print speed: 30-60mm/s;

Airflow model: No (may be required for small parts):

Retract: length 5-6 mm, speed 45 mm/s;

Shrinkage: negligible

Tips from the manufacturer Bestfilament:

• If there are problems with removing the finished model from the table, we recommend that you cool the product to the extreme: take it out into the snow, put it in the freezer.
• To improve the adhesion of plastic to the platform, it is recommended to use a tape, glue, varnish.
• If the plastic is wet, we recommend using a dryer

To improve the adhesion of plastic to the platform coating, we recommend using a tape, glue, varnish

If the plastic is wet, we recommend using a filament dryer

Suitable for printing on Creality Ender 3D printers, Flying Bear Ghost, Anycubic Mega, Flash Forge Adventurer, Voxelab, QIDI, Wanhao, Flash Forge Creator, Picaso3D, Anycubic 4Max, Imprinta Hercules, TierTime, Zortrax, Raise3D, CreatBot, Ultimaker

Bestfilament was founded in 2013. We are engaged in the production of consumables (ABS, PLA, PETG, Flex, SBS (Watson), ASA, Nylon, TPU, HIPS, Carbon and others) for 3D printers

The filaments produced by our company have all the necessary product quality certificates. They are appreciated by buyers in Turkey, Germany, Spain, Poland, Holland, the USA, etc.

We ensure the production of our 3D plastic at the highest level, both in terms of the quality of the material, and in such an indicator, which is extremely important for printing, as the constancy of the diameter of the plastic filament

Bestfilament is the best value for money!